Printek FormsMaster 8000 - Manual (Page 29)

Epson FX Emulation
23
Cancel Condensed Mode DC2
Cancels condensed mode set by SI or ESC SI.
Control code: DC2
Hexadecimal: 12
Select double-wide mode (one line) SO
(or) ESC SO
Selects double-wide mode for one line. Double-wide mode doubles the width of all characters, but
does not affect character height. This mode is cancelled by a carriage return or DC4.
Control code: SO
Hexadecimal: 0E
Escape Sequence: ESC SO
Hexadecimal: 1B 0E
Cancel Double-Wide Mode (one line) DC4
Cancels double-wide mode selected by SO or ESC SO. Does not cancel double-wide mode selected
by ESC W or ESC !.
Control code: DC4
Hexadecimal: 14
Double-Wide Mode ESC W n
Selects double-wide mode for n=1, or cancels for n=0. Double-wide mode doubles the width of all
characters, but does not affect character height.
Example: The following escape sequence will select double-wide mode.
Escape Sequence: ESC W 1
Hexadecimal: 1B 57 31
Double-High Mode ESC w n
Selects double-high mode for n=1, or cancels for n=0. Double-high mode doubles the height of all
characters, but does not affect character width.
Example: The following escape sequence will select double-high mode.
Escape Sequence: ESC w 1
Hexadecimal: 1B 77 31