Panasonic DX-2000 - Manual (Page 38)

36
User Parameters
Your facsimile machine has several basic settings (User Parameters) to help you keep records of the documents you
send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID Number
help to identify you when you send or receive documents.
Setting the Date and Time
At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
(see Note 1)
(see Note 2)
1
2
3
4 Enter the new date and time.
Ex: Month : September
Date : 12th
Year : 1999
Time : 3:00 PM
If you make a mistake, use
or to move the cursor
beyond the incorrect character, press then re-
enter the new character.
5
1. The clock of your machine is equipped with D.S.T.(Daylight Saving Time) system. So, your clock will automatically
set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April and set the time back from 2:00 AM to
1:00 AM on the last Sunday of October.
If your state does not use the D.S.T. system, change the Fax Parameter No. 035 (DAYLIGHT TIME) to "Invalid"
(see page 73).
2. The current Date & Time must be set because it is required by the Telephone Consumer Act of 1991. (For details,
see FCC NOTICE at the end of this User’s Guide.)
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨ ∧
1
1:USER PARAMETERS?
PRESS SET TO SELECT
SET DATE & TIME
❚ 1-01-1999 00:00
0 9
1 2
1 9 9 9
1 5 0 0
CLEAR
DATE & TIME
09-12-1999 15:00
SET STOP
Note: