Philips BDP9600 - Manual (Page 13)

14
5 Play
Play a disc
Caution
Do not insert any objects other than discs into the disc slot. •
1 Press on the front panel to open the disc
compartment.
You may also press and hold • on the
remote control to open/close the disc
compartment.
2 Insert a disc with its label facing up.
3
Start disc play.
To stop disc play, press • .
Note
Check disc/file formats supported (see “Your Blu-ray disc •
player” > “Playable media”).
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preference Setup” >
[Parental Control] ).
If you pause or stop a disc, the screen saver appears after
•
10 minutes of inactivity. To deactivate the screen saver,
press any button.
After you pause or stop a disc and no button is pressed
•
within 30 minutes, this player automatically switches to
standby.
Play from a USB device
Play or view media files on the following USB devices:
flash drive •
memory card reader •
HDD (This player can detect only a portable •
hard disc drive with USB power peak current
no more than 500mA.)
1 Connect a USB device to the (USB) jack.
2 Press , and select [browse USB], and press
OK.
A contents menu is displayed.
»
One-touch play
1 Press (standby) to turn on this player.
The TV (if the TV supports one-touch play)
»
automatically turns on and switches to the
correct video-in channel.
If a disc is loaded, disc play automatically
»
starts.
One-touch standby
1 Press and hold (standby) for more than
3 seconds.
All the connected devices (if the device
»
supports one-touch standby) automatically
switch to standby.
Note
Philips does not guarantee interoperability with all HDMI •
CEC devices.
EN