beautypg.com

3 product information, 3 product information -10, Smart i/o user’s manual – Pepper Computer Modular Computers RS485 User Manual

Page 22: Introduction

background image

SMART I/O User’s Manual

March 12, 1996

©1996 PEP Modular Computers GmbH

Page 1 - 10

Introduction

Product

Description

Order Nr.

ISaGRAF-
ROM-START

ROM kit v3.x for SMART I/O enables the generation of custom
firmware EPROMs. Platform can be a PC or OS-9 development
system

13829

OS9TRG-RG-
SMART

Target CPU kit for SMART I/O (OS-9 v3.x/Ix.x disks)

11299

OS9DEVFT-
WIN-SMART

OS-9/68000 FasTrak for Windows development pack for SMART I/O.
Contains extended OS-9 v3.x/Ix.x, PEP utilities and I/O drivers with
necessary makefiles for complete application and EPROM
generation.

13887

OS9DEVFT-
UNIX-SMART

OS-9/68000 FasTrak for UNIX development pack for SMART I/O.
Contains extended OS-9 v3.x/Ix.x, PEP utilities and I/O drivers with
necessary makefiles for complete application and EPROM
generation.

13926

OS9-PFB-
SMART

OS-9 PROFIBUS starter kit II for 1 node. Includes license, disk and
manual

1662

OS9-PFB-
SMART(FT)

OS-9 PROFIBUS starter kit II for 1 node operating under FasTrak for
Windows. Includes license, disk and manual

12666

Cable

3 meters with 9-pin D-Sub (female) & RJ45 connectors for PC
operation

10890

Cable

3 meters with 25-pin D-Sub (male) & RJ45 connectors for modem
operation

10891

Screw Term.

For the SMART-BASE timer I/O. Pack of 5, 2x3 array

10892

SCR-2*7.

For the SMART-Modules. Pack of 5, 2x7 array

10893

Dummy FP

For unused SMART-Module slots. Available in packs of 20

10894

Battery

3V, 190mAh lithium batery (button) BR2032 for use in the standard
temperature range (0

°

C to +70

°

C)

11281

Battery

3V, 850mAh lithium batery (cylinder) CR14250 for use in the
extendedtemperature range (-40

°

C to +85

°

C)

11282

1.3 Product Information

The SMART-BASE is a control module possessing an RS485 PROFIBUS

and serial RS232 interface as standard and provision for up to three SMART-

Modules. The modules currently available are discussed later. Normally, the

base unit is mounted on a DIN rail (see Weights & Measures section) which

in turn may be fixed in a cabinet. SMART-EXT units may be attached in a

similar manner.

This manual is related to the following products: