Panasonic GPH5D User Manual

Page 61

Text mode
Original mode

Note: The signals listed below must be checked at connector HX1 of the HX-
Board.

Note: A possible malfunction of the HX-Board may
exist if any of the signals listed on this page is missing.
Verify that all DC inputs to the HX-Board are present. If
these are correct, replacement of the HX-Board is
recommended.

CN HX1, Pin B20

10us / div.20mV

Red Signal Input

CN HX1, Pin B18

10us_20mV

Green Signal Input

CN HX1, Pin B16

10us/ div, 20mV

Blue Signal Input

CN HX1, Pin B12

5ms/ div, 0.2V

Vertical Drive

CN HX1, Pin B14

10us/div, 0.2V

Horizontal Drive

CN HX1, Pin A4

5us/ div, 20mV

Serial Data

CN HX1, Pin B4

5ms/ div, 0.2V

Serial Clock