beautypg.com

Introduction, Environmental information, Supplied accessories – Philips DVD740VR/001 User Manual

Page 4: Safety information, Symbols used in this manual

background image

4

English

Thank you for purchasing this Philips DVD/
VCR player.This Owner’s Manual explains the
basic operation of this DVD/VCR.

Environmental Information

All unnecessary packaging has been omitted.
Packaging has been made easy to separate into
three materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags, protec-
tive foam sheet).
Your DVD/VCR consists of materials which
can be recycled and reused if disassembled by
a specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equip-
ment.

Supplied accessories

– Remote control
– Batteries (two AA size) for remote control
– SCART cable (not available for all versions)
– Audio Cable
– RF Coaxial cable
– Owner’s Manual

Safety Information

● Before operating the DVD/VCR, check that

the operating voltage indicated on the type-
plate (or the voltage indication beside the
voltage selector) is identical with the voltage
of your local power supply. If not, please
consult your dealer.

● Place the DVD/VCR on a flat, hard and stable

surface.

● There must be sufficient room in front of the

player for the disc tray to be opened.

Introduction

● In cabinet, allow about 2.5cm (1 inch) of free

space all around the player for adequate venti-
lation.

● Do not expose your player to extreme of

temperature or humidity.

● If the DVD/VCR is brought directly from a

cold to a warm location, or is placed in a very
damp room, moisture may condense on the
lens of the disc unit inside the DVD/VCR
player. Should this occur, the DVD/VCR would
not operate normally. Leave the player on for
about one hour with no disc in the DVD/VCR
until normal playback is
possible.

● The mechanical parts of the set contain self-

lubricating bearings and must not be oiled or
lubricated.

● Never spill liquid of any kind on this unit. If liq-

uid is spilled into the unit, consult qualified
service engineer.

When the DVD/VCR is switched to

Standby mode, it is still consuming some
power. To disconnect the system from
the power supply completely, remove
the AC power plug from the wall socket.

Symbols Used in this Manual

The below symbols appear in some headings
and notes with the following meanings:

Helpful Hints!

Some DVD video discs require specific

functions or allow only limited functions
during playback.

” may appears on the TV screen

which means that the function is not avail-
able on that specific DVD video disc.

– Description refers to playback of video cassette tapes

– Description refers to playback of DVD-video discs

– Description refers to playback of Audio CDs

– Description refers to playback of MP3 files

VCR

DVD

CD

MP3