Philips DVD740VR/001 - Manual (Page 21)

21
English
VCR Operation
ShowView
N o . : 1 2 3 4 5 6 7 8 9
2
Press the numerical key pads button to set
the S
HOW
V
IEW
number of the programme you
want to record.
Timer Recording using the
S
HOW
V
IEW
System
You can programme the timer using the
S
HOW
V
IEW
numbers that are printed in TV
guide magazine.You can set seven pro-
grammes to record.
ShowView
N o . : _ _ _ _ _ _ _ _ _
1 With the clock set to ON, press the VCR
button, then the SHOWVIEW button.
a will be displayed.
● Press the REW h button to go back one
digit from current digit while you set the
S
HOW
V
IEW
number.
Notes:
– If the S
HOW
V
IEW
number is not available,
it will be cleared automatically when you
press the SHOWVIEW button. Enter the
correct S
HOW
V
IEW
number and press the
SHOWVIEW button again.
– If the S
HOW
V
IEW
number flashes when
you press the SHOWVIEW button, this
means that the S
HOW
V
IEW
number you
entered was incorrect or the timer record-
ing you just programmed and another
timer recording overlap.
3
● For once-only recording :
Press the SHOWVIEW button.
● For daily recording :To record a TV pro-
gramme at the same time on the same chan-
nel from Monday through Friday.
Press DAILY/WEEKLY button repeatedly to
select DAILY (MO-FR), then, press the
SHOWVIEW button.
● For everyday recording :To record a TV pro-
gramme at the same time on the same chan-
nel every day.
Press the DAILY/WEEKLY button repeatedly
to select DAILY (MO-SU), then, press the
SHOWVIEW button.
● For weekly recording :To record a TV pro-
gramme at the same time on the same chan-
nel every week.
Press the DAILY/WEEKLY button repeatedly
to select WEEKLY, then, press the
SHOWVIEW button.
4 Confirm the channel number, then, press the
FF g button.
● If your local channel information is pro-
grammed in DVD/VCR memory, your local
channel number appears automatically. (Refer
to “S
HOW
V
IEW
Guide Channel Set”)
● If your local channel information is not pro-
grammed in DVD/VCR memory, “– –” or an
incorrect channel number may appear. In this
case, press the PLAY B or STOP C button
repeatedly until your desired channel number
appears.Then, press the FF g button.
● When you select the channel number using
the PLAY B or STOP C button, it memorises
in DVD/VCR memory.
TIMER NUMBER 1
DATE
06 / 05 SA
START 19 : 30
END 20 : 30
CHANNEL 16
SPEED SP
VPS/PDC OFF
5 Press the PLAY B or STOP C button repeat-
edly until your the desired tape speed
appears.
TIMER NUMBER 1
DATE
06 / 05 SA
START 19 : 30
END 20 : 30
CHANNEL 16
SPEED SP
VPS/PDC OFF
6 Press the PLAY B or STOP C button repeat-
edly to select “ON” or “OFF”.
TIMER NUMBER 1
DATE
06 / 05 SA
START 19 : 30
END 20 : 30
CHANNEL 16
SPEED SP
VPS/PDC ON
7 Press the MENU button to exit.
8
Press the TIMER button to activate the timer.
The TIMER light on the display comes on.