Philips D721 - Manual (Page 75)

6.3.2.3 Call diversion
You can set up call diversion destinations for your analog terminal. You can
use the following variants:
Unconditional call diversion
Call diversion after a time
Call diversion on busy
You can also activate call diversion on the ISDN telephone for the analog
terminal (see 3.4.1). In this case, settings can be made separately for each
MSN. On the analog terminal, call diversion is set up jointly for MSNs 5...8.
Initial state: dial tone
Steps:
No. Description Input Display
Acknowledgement tone
* 6 7 *
Diversion
destination no.
#
Activate call
diversion on busy or
Acknowledgement tone
# 6 1 #
Deactivate call
diversion after a time or
Pos. acknowl. tone=on
Neg. acknowl. tone=off
* # 6 1 #
Check call diversion
after a time or
Acknowledgement tone
* 6 1 *
Diversion
destination no.
#
Activate call diversion
after a time or
Acknowledgement tone
# 2 1 #
Deactivate uncondi-
tional call diversion or
Pos. acknowl. tone=on
Neg. acknowl. tone=off
* # 2 1 #
Check uncondi-
tional call diversion or
Acknowledgement tone
* 2 1 *
Diversion
destination no.
#
Activate uncondi-
tional call diversion 1
74