Philips D721 - Manual (Page 46)

4.2 Overview of programmable functions
• Programming the exchange line code
• Enabling/disabling camp-on busy
• Call list: editing or clearing entries
• Call diversion: programming the call diversion destination
• Automatic keypad switchover
• Date and time
• Programming the direct call number (baby call)
• Selecting the display language
• Charges: clearing the call charge counter and programming a factor
• Resetting the unit
• Programming call/conversation pick up (SmartLine D721 only)
• Programming the international prefix
• Entering, editing or clearing MSNs
• Programming the national prefix
• Network provider codes
• Defining the local area code
• Editing the PIN
• Setting the identification
• Defining barred numbers
• Telephone book
– Creating a new entry
– Editing/clearing an existing entry
• Disabling/enabling switching at the exchange
• Clearing the redial memory
You can also access all menu items after entering
s 0
(entering the pro-
gramming mode) by scrolling with the
*
and
#
keys and, if necessary,
by activating a lower programming level (e.g. settings) with
o
.
You terminate programming of the relevant menu item by pressing
o
. If
programming was successful, you will hear the positive acknowledgement
tone. Otherwise, you will hear the negative acknowledgement tone. You can
cancel programming at any time by pressing the Disconnect key
t
.
To quit the menu, press the Disconnect key
t
, if necessary several times.
45