Philips D721 - Manual (Page 41)

3.4.2 Switching direct call (baby call) on/off
When the direct call function is activated, when any key is pressed
(except
s
) after lifting the handset, a connection is established
automatically to the previously programmed telephone number.
If you have already programmed the direct call number (see "4.9 Program-
ming a direct call number"), you activate the direct call function as follows.
You hear the negative acknowledgement tone if no number is programmed.
If the direct call function is activated, you can deactivate it with this
procedure.
Initial state: idle
Steps:
No. Description Input Display
The direct call function can only be activated when the telephone lock if off
(see 3.4.7).
88 DIRECT CALL
123456
Е‹ З ¤‰ ÏÌÓÛı
s [ ∫
Direct call on or off.
When you activate
the direct call
function, the direct
call number is
displayed briefly 1
06.05.99 888 10:40
Е‹ З ¤‰ ПМУЫ ı
t
If necessary, end
programming 7
MSN2N:BUSINESS
§ NUMBER?
Е‹ З ¤‰ ПМУЫ ı
o
Activate diversion
(next possible call
diversion is offered) 6
MSN2B:BUSINESS
123456 §
Е‹ З ¤‰ ПМУЫ ı
s r
Use a programmed
destination
(see also 4.6) or
40