Philips D721 - Manual (Page 45)

4 Programming
This chapter describes all available programming functions. Beforehand,
though, you are familiarised with the 'as-delivered' settings and the default
settings that apply after the unit is reset.
Note: items marked “*“ are described in Section 3.4.
4.1 Default settings
Feature 'As-delivered' After reset
Exchange line code No entry No entry
Camp-on busy On On
Call list No entry No entry
Automatic keypad switchover On Unchanged
Date/time 00.00.99/00:00 00.00.99/00:00
Direct call Off Off
Direct call number No entry Unchanged
Display contrast * Level 5 Level 5
Display language German Unchanged
Charge factor No entry No entry
Charge counter Cleared Unchanged
Call/conversation pick up
(SmartLine D721 only)
Off Unchanged
Handset volume * Normal Normal
Open listening/hands free volume Level 4 Level 4
MSNs (number and name) No entry Unchanged
Network provider code scheme Preset Unchanged
Local area code No entry Unchanged
PIN 0000 Unchanged
Identification, outgoing On On
Identification, incoming On On
Call diversion destinations preprogrammed No
entry Unchanged
Barred numbers No entry No entry
Telephone book No entry Unchanged
Telephone lock * Off Off
Tone ringing volume/tone * 4 / * 4 / *
Switching at the exchange Off Unchanged
Preprogrammed call diversion destinations
None Unchanged
Prefix, national 0 0
Prefix, international No entry No entry
Redial No entry No entry
44