Polycom DOC2585A - Manual (Page 56)

Chapter 2-First Time Installation and Configuration
2-26
5 Enter the required DNS information in the dialog box.
Table 2-5 Fast Configuration Wizard – DNS
Field Description
MCU Host Name Enter the name of the MCU on the network.
Default name is RMX.
DNS Select:
• Off – if DNS servers are not used in the network.
• Specify – to enter the IP addresses of the DNS
servers.
Note: The IP address fields are enabled only if
Specify is selected.
Register Host
Names
Automatically to
DNS Server Select this option to automatically register the MCU
Signaling Host and Shelf Management with the DNS
server.
Local Domain
Name Enter the name of the domain where the MCU is
installed.
Primary DNS
Server IP Address The static IP address of the primary DNS server.