Proficient Audio Systems 00P3DG090DSEB3 - Manual (Page 23)

DVR User’s Manual
22
3.5.6 ezRecord Setup
This item aims to ease the complicated record settings, and to make the
setup much easier. Note that the item can be reached only when you select
as the option for .
Select from and press ENTER, the
sub-menu appears as below figure:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality 2 Days
Yes
Yes
Yes
3.75
Best
Follow these steps to Setup ezRecord:
• Select and press ENTER, then press
UP/DOWN to choose an option. The average normal PPS & Quality will
be adjusted automatically. The maximum of days depends of the size of
your HDD. In other words, the larger the size of the HDD installed, the
more days the unit can record.
• Move to and press ENTER. This item is for you to
select whether you want the DVR to record during daytime. If yes, use
UP/DOWN to select as to enable day time recording; or select
to disable.
• Repeat the same procedures through the 3rd and 4th item, respectively.
Note that will be inaccessible if you select for
the item in .
• Select and press ENTER, then press
UP/DOWN to make a choice. The will be
computed automatically.
• Select and press ENTER, then press
UP/DOWN to make a choice. The will be
computed automatically.
NOTE:
The current number of connected cameras will affect the
recording quality automatically calculated through the
Setup>. Therefore, once you disconnect cameras or connect more
cameras to the unit, you should reset the .
Record Info