Registering your handset – Philips DECT 221 User Manual

Page 6

www.philips.com/faqs/dect

Registering your handset

You will need to register your handset if it shows

NOT REG in the display or if you wish to un-register from its original

base and register the handset to a different base unit. You can register up to 4 handsets to your DECT 221 base station
and up to 5 handsets to your DECT 225 base station.

To register your handset:

1. Press the

MENU key.

2. Select

SETTINGS and press the OK key.

3. Select

4. Before you enter the PIN, press and hold the

PAGING key on the base for 4 seconds until a

registration tone is emitted (DECT 225 only). The base is now in the registration mode. (If the base is

full and cannot take on any more handset, it will emit a reject tone instead (DECT 225 only) and you will

not be able to register any more handset. See Section 9 - Un-registering a handset - to delete a currently

registered handset.)

5. Enter the PIN of the base and press the

OK key.

During the registration period, you will see

SEARCHNG on the handset.

You will hear a confirmation tone if the registration is successful. The handset label and the handset number will be
displayed. If the registration is not successful, the previously unregistered handset will display

NOT REG again and the

previously registered handset will connect back to its original base again. Follow the procedure and try again.

SETTING UP YOUR PHONE

This manual is related to the following products:

DECT 225