9 system, Registering a handset, Un-registering a handset – Philips DECT 221 User Manual
Page 21: 20 un-registering a handset
www.philips.com/faqs/dect
20
www.philips.com/faqs/dect
21
9 System
Registering a handset
You can register up to 4 handsets to your DECT 221 base station and up to 5 handsets to your DECT 225 base station.
One handset can be registered to only one base at a time.
1. Press the
MENU key.
2. Select
SETTINGS and press the OK key.
3. Select
REGISTER and press the OK key.
4. Before you enter the PIN, press and hold
the PAGING key on the base for 4 seconds. A registration
tone will be emitted.
5. Enter the PIN code.
6. Press the
OK key.
Un-registering a handset
A handset can un-register another handset registered to the same base. It cannot un-register itself.
1. Press the
MENU key.
2. Select
SETTINGS and press the OK key.
3. Select
DEL HS and press the OK key.
4. Select the handset you would like to un-register and press
the
OK key.
5. Enter the PIN.
6. Press the
OK key to confirm.
Unsuccessful registration
If the registration is not successful, the handset registers back to its original base unit, or
SEARCHNG is
displayed if it has lost link with its original base, or
NOT REG is displayed if it is registering for the first time.
Follow the procedure and try again.
The base is full
If the base is full, it cannot take on any more handset. You will hear a reject tone instead (DECT 225 only) and
you will not be able to register any more handset. See the section below Un-registering a handset to delete a
currently registered handset.
Successful registration
You will hear a confirmation tone if the registration is successful. The handset label and the handset number will
be displayed.
SYSTEM