Cautions on use, Moving the player, Place of installation – Pioneer BDP-LX52 User Manual
Page 54: Turn the power off when not using the player, Condensation, Cleaning the player, Cleaning the pickup lens, Handling discs, Moving the, Player
07
54
En
Cautions on use
Moving the player
If you need to move this unit, fi
rst remove the disc if
the
re’s one loaded, and close the disc tray. Next, press
STANDBY/ON to switch the power to standby,
checking that the
POWER OFF indication on the front
panel display goes off. Wait at least 10 seconds. Lastly,
disconnect the
power cord.
Neve
r lift or move the unit during playback — discs rotate
at a high s
peed and may be damaged.
Place of installation
Select a stable
place near the TV and AV system to which
the unit is connected.
Do not
place the player on top of a TV or color monitor.
Kee
p it away from cassette decks or other components
easily affected by magnetism.
Avoid the following ty
pes of places:
• Places ex
posed to direct sunlight
• Humid o
r poorly ventilated places
• Ext
remely hot or cold places
• Places subject to vib
ration
• Dusty
places
• Places ex
posed to soot, steam or heat (in kitchens,
etc.)
Do not place objects on top
Do not
place objects on top of the player.
Do not obstruct the ventilation
holes
Do not use the
player on a shaggy rug, bed, or sofa, and
do not cove
r the player with a cloth, etc. Doing so will
prevent heat dissipation and could lead to damage.
Keep away from heat
Do not
place the player on top of an amplifier or other
device gene
rating heat. When installing in a rack, to avoid
the heat gene
rated by the amplifier and other devices,
place it on a shelf below the amplifier whenever possible.
Turn the power off when not
using the player
De
pending on the conditions of the TV broadcast signals,
st
riped patterns may appear on the screen when the TV is
tu
rned on while the player’s power is turned on. This is not
a malfunction with the
player or TV. If this happens, turn
the
player’s power off. In the same way, noise may be
hea
rd in the sound of a radio.
Condensation
If the
player is moved suddenly from a cold place into a
wa
rm room (in winter, for example) or if the temperature
in the
room in which the player is installed rises suddenly
due to a heate
r, etc., water droplets (condensation) may
fo
rm inside (on operating parts and the lens). When
condensation is
present, the player will not operate
properly and playback is not possible. Let the player stand
at
room temperature for 1 or 2 hours with the power
tu
rned on (the time depends on the extent of
condensation). The wate
r droplets will dissipate and
playback will become possible.
Condensation can also occu
r in the summer if the player
is ex
posed to the direct wind from an air-conditioner. If
this ha
ppens, move the player to a different place.
Cleaning the player
No
rmally, wipe the player with a soft cloth. For tough dirt,
a
pply some neutral detergent diluted in 5 to 6 parts water
to a soft cloth, w
ring out thoroughly, wipe off the dirt, then
wi
pe again with a dry cloth.
Note that getting alcohol, thinne
r, benzene or insecticide
on the
player could cause the print and coating to peel off.
Also, avoid leaving
rubber or vinyl products in contact
with the
player for long periods of time, as this could
damage the cabinet.
When using chemical-im
pregnated wipes, etc., read the
wi
pe’s cautions carefully.
Un
plug the power cord from the power outlet when
cleaning the
player.
Caution for when the unit is
installed in a rack with a glass
door
Do not
press the
OPEN/CLOSE on the remote control
to o
pen the disc tray while the glass door is closed. The
doo
r will hamper the movement of the disc tray, and the
unit could be damaged.
Cleaning the pickup lens
The
player’s lens should not become dirty in normal use,
but if fo
r some reason it should malfunction due to dust
o
r dirt, consult your nearest Pioneer authorized service
cente
r. Although lens cleaners for players are
comme
rcially available, we advise against using them
since some may damage the lens.
Handling discs
Do not use damaged (c
racked or warped) discs.
Do not sc
ratch the disc’s signal surface or let it get dirty.
Do not load mo
re than one disc into the player at a time.
LX52_VXJ5_IBD_EN.book 54 ページ 2009年3月3日 火曜日 午後7時29分