Pioneer BDP-LX52 User Manual
Page 41
41
En
06
Setting the IP address
1
Select and set Network
IP Address Next
Screen.
Use
/ to select, then press ENTER.
2
Set IP address.
Use
/// to set the IP address of the player or DNS
se
rver, then press
ENTER.
•
Auto Set IP Address
On – The player’s IP address is obtained
automatically. Select this when using a b
roadband
router or broadband modem that has a DHCP
(Dynamic Host Configu
ration Protocol) server
function. This
player’s IP address will automatically
be allocated f
rom the DHCP server.
Off – The player’s IP address must be set manually.
Use the numbe
r buttons (0 to 9) to input the IP
add
ress, subnet mask and default gateway.
•
Auto Set DNS Server Address
On – The DNS server’s IP address is obtained
automatically.
Off – The DNS server’s IP address must be set
manually. Use the numbe
r buttons (0 to 9) to input the
DNS se
rver’s IP address stipulated by your Internet
se
rvice provider.
Note
• When
Auto Set IP Address is set to Off, Auto Set
DNS Server Address is also set to Off.
• Fo
r information on DHCP server function, refer to the
netwo
rk device’s operating instructions.
• You may need to contact you
r Internet service
provider or network administrator when inputting the
IP add
ress manually.
Setting the proxy server
Only set the
proxy server if so instructed by your Internet
se
rvice provider.
1
Select and set Network
Proxy Server Next
Screen.
Use
/ to select, then press ENTER.
2
Select and set Use or Not use at Proxy Server.
Use
/ to change, then press .
•
Use – Select this when using a proxy server.
•
Not use – Select this when not using a proxy server.
If you have selected
Use, proceed to step 3.
3
Select and set Server Select Method.
Use
/ to change, then press .
•
IP Address – Input the IP address.
•
Server Name – Input the server name.
4
Input IP Address or Server Name.
Use the numbe
r buttons (0 to 9) to input the number if you
select IP add
ress by step 3. Use
/ to move the cursor.
Use the numbe
r buttons (0 to 9) to input characters if you
select Se
rver Name by step 3.
The cha
racters that can be input for the server name are
listed on the table below. P
ressing a button repeatedly
cycles th
rough the characters shown.
• If you want to ente
r two characters in succession that
a
re both on the same button (for example a
P and an
R), press
after inputting the first character then
in
put the second character.
• Use
CLEAR to delete the last character.
• Use
/ to move the displayed characters when all
the in
put characters cannot be displayed.
5
Input Port Number.
P
ress
, use the number buttons (0 to 9) to input the
numbe
r.
6
Press ENTER to set.
Displaying the network settings
Select and set Network Display Network
Configuration
Next Screen.
Use
/ to select, then press ENTER.
IP Address
Auto Set IP Address
IP Address
Subnet Mask
Default Gateway
Auto Set DNS Server Address
DNS Server (Primary)
DNS Server (Secondary)
Off
Network
BD PLAYER
Off
Key
Characters
Key
Characters
1
1 . –
6
m n o 6
2
a b c 2
7
p q r s 7
3
d e f 3
8
t u v 8
4
g h i 4
9
w x y z 9
5
j k l 5
0
0
Use
Proxy Server
Proxy Server
Server Select Method
Server Name
Port Number
Server Name
Network
BD PLAYER
LX52_VXJ5_IBD_EN.book 41 ページ ２００９年３月３日 火曜日 午後７時２９分