Pioneer BDP-LX52 - Manual (Page 16)

02
16
En
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu
acco rding to the type of cable connected (page 18).
• To out put video signals from this player, connect
using one of the following (not including when
connected using an HDMI cable): a com
ponent video
cable o r a video cable.
Connecting a TV using a
video/audio cable
Caution
• Connect the player’s video output directly to
your TV.
This
player supports analog copy protection
technology. The refore the picture may not be
dis played properly if connected to a TV via a DVD
recorder/video deck or when playing the player’s
out
put material that is recorded by a DVD recorder/
video deck. Fu rthermore, the picture may not be
dis played properly due to the copy protection when
the player is connected to a TV with a built-in video
deck. Fo r details, contact the manufacturer of your
TV.
Note
• Video signals a re output with a resolution of 576/50i
o r 480/60i when connected using a video cable.
• When connected to the TV using a com ponent video
cable, video signals a re not output with a resolution of
1080/50i, 1080/50 p, 720/50p, 1080/24p or 1080/60p.
• De pending on the output video resolution setting, the
picture may not be output (page 21).
Connecting an AV receiver or
amplifier using an optical
digital audio cable
Note
• To switch the video f rom the AV receiver or amplifier,
also connect the video out put terminals.
Connecting components
to the USB port
The data downloaded with the BD-LIVE function and the
data used with the BONUSVIEW function when
playing
BD-ROMs can be sto red on a device connected to the
USB port (external storage).
About USB (external storage)
devices
The USB (exte rnal storage) devices that can be
connected to the player are as shown below.
• USB 2.0-com patible memory devices or hard disks
• FAT16 o r FAT32 file system, minimum 1 GB capacity
(2 GB o r more recommended)
Note
• Devices fo rmatted with a file system other than the
above cannot be used. Such devices may howeve r be
usable if they a re formatted from the player.
• Exte rnal storage devices may not be recognized if
they contain multi ple partitions.
• Some exte rnal storage devices may not operate with
this player.
• O peration of external storage devices (USB memory
devices, exte rnal hard disks, etc.) is not guaranteed.
OUTPUT
COMPONENT VIDEO
CONTROL
IN
Y
R AUDIO VIDEO L
P B P R
TV
Playe r’s rear panel
To com ponent
video in put terminals
A com ponent cable or
th ree commercially
available video cables
can be used instead
of the video cable
(yellow
plug) of the
included video/audio
cable fo
r connection.
Di rection of
signal flow
Red
White
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using an
o
ptical digital audio
cable o r an audio cable
(2 channels) (below).
To video/audio
in
put terminals
Video/aud
io
cable (inc
luded)
Yell
ow
LAN (100) HDMI OUT OUTPUT
COMPONENT VIDEO
DIGITAL
OUT
OPTICAL
CONTROL
IN
Y
R AUDIO VIDEO L
P B P R
RS-232 C
USB (BD STORAGE)
Playe r’s rear panel
To audio in put
te rminals
AV receiver or
am plifier
Re
d Wh
it
e
Di rection of signal flow
2-channel analog
audio can also be
connected.
To o ptical digital
audio in put terminal
O ptical digital audio
cable (comme rcially
available)
Video/audio cable
(included)
LX52_VXJ5_IBD_EN.book 16 ページ ２００９年３月３日 火曜日 午後７時２９分