Pioneer BDP-LX52 - Manual (Page 14)

02
14
En
Note
• Set HDMI High Speed Transmission to Off when
using an HDMI cable othe r than a High Speed
HDMI™ cable (a Standa rd HDMI™ cable).
• The following restrictions apply when HDMI High
Speed Transmission is set to Off:
– Dee p Color signals are not output.
– If the out put video resolution is set to Auto, the
signals a re output with a resolution of 1080/50i or
1080/60i when TV’s preferred resolution is 1080/50p
o r 1080/60p.
– When the out put video resolution is set to 576i/480i
o r 576p/480p, Dolby TrueHD and DTS-HD Master
Audio audio signals a re output as Dolby Digital,
DTS Digital Su rround or linear PCM signals. 96 kHz
o r 192 kHz multi-channel audio signals are output
as linea r PCM 2-channel audio signals (page 45).
• When an HDMI cable with a built-in equalize r is
connected, it may not o perate properly.
 When connected to a DVI device
• It is not possible to connect DVI devices
(computer displays, for example) that are not
compatible with HDCP. HDCP is a specification to
protect audiovisual content across the DVI/HDMI
inte
rface.
• No audio signals a re output. Connect using an audio
cable, etc.
• This player is designed for connection with HDMI-
com patible devices. When connected to a DVI device,
it may not o perate properly depending on the DVI
device.
About KURO LINK function
The functions listed below wo rk when a Pioneer KURO
LINK-com patible Flat Screen TV, AV system (AV receiver
o r amplifier, etc.) or HD AV Converter is connected to the
player using an HDMI cable.
Functions operated from the TV
Such
player operations as starting and stopping playback
and dis playing the menus can be performed from the Flat
Sc reen TV.
Auto-select function
The in
put switches automatically on the Flat Screen TV,
AV system (AV receiver or amplifier, etc.) and HD AV
Conve rter when playback is started on the player or the
Home Menu o r Home Media Gallery is displayed. When
the in put is switched, the playback picture, the Home
Menu o r Home Media Gallery appears on the Flat Screen
TV.
Simultaneous power function
When
playback on the player is started or the Home Menu
o r Home Media Gallery is displayed, if the Flat Screen TV’s
power was off, its power turns on automatically. When the
Flat Sc
reen TV’s power is turned off, the player’s power
automatically tu rns off.
Unified language function
When the language info
rmation from a connected Flat
Sc reen TV is received, you can have the player’s
on-sc reen display language change automatically to that
of the Flat Sc reen TV. This function is available only when
playback is stopped and the menu screen is not
dis
played.
Caution
• Also refer to the operating instructions of the Flat
Sc reen TV, AV system (AV receiver or amplifier, etc.)
and HD AV Conve rter.
Note
• CONTROL on the player’s front panel display lights
when the KURO LINK function is activated (
page 12).
 To use the KURO LINK function
• The KURO LINK function only wo rks when outputting
video signals f rom the HDMI OUT terminal.
• The KURO LINK function wo rks when KURO LINK is
set to On on the player (page 38).
• The KURO LINK function o perates when KURO LINK
is set to On fo r all devices connected with HDMI
cables. Once connections and the settings of all the
devices a
re finished, be sure to check that the player’s
picture is output to the Flat Screen TV. (Also check
afte
r changing the connected devices and
reconnecting HDMI cables.) The KURO LINK function
may not o
perate properly if the player’s picture is not
properly output to the Flat Screen TV.
• Use High S peed HDMI™ cables when using the
KURO LINK function. The KURO LINK function may
not o
perate properly if other HDMI cables are used.
• Fo r some models, the KURO LINK function may be
referred to as “HDMI Control”.
• The Simultaneous power function is activated when
the player is set as follows (page 38):
Display Power On: On
Display Power Off: On
 About PQLS function
The PQLS (P recision Quartz Lock System) is a transfer
cont rol technology using the KURO LINK function. The
player’s output signals are controlled from the AV
receiver or amplifier to achieve high quality sound
playback using the quartz oscillator of AV receiver or
am
plifier. This eliminates the influence of the jitter
gene rated upon transfer which can adversely affect the
sound quality.
• The player supports the “PQLS 2ch Audio” function
that is only activated when playing audio CDs (CD-
DAs), and the “PQLS Multi Su rround” function that is
activated when playing all discs (BDs, DVDs, etc.)
with audio out put in linear PCM.
LX52_VXJ5_IBD_EN.book 14 ページ ２００９年３月３日 火曜日 午後７時２９分