Pioneer BDP-LX52 - Manual (Page 44)

06
44
En
Software updating
The softwa re of the player can be updated by connecting
it to the Inte rnet using a LAN cable.
Befo re updating the software, make sure that you have
connected the player to the network and made the
necessa ry settings (pages 17 and 41).
Caution
• Do not un plug the power cord during software
u pdating. Otherwise, the updating will be aborted and
malfunction may occu r with the player.
• The re are two processes for software updating,
downloading and u pdating. Both processes may take
a ce rtain period of time.
• De pending on the Internet connection conditions,
downloading may take a long time.
• Othe r operations are defeated during software
u pdating. Furthermore updating process cannot be
canceled.
• When the f ront panel display is off, turn it on with FL
DIMMER. When updating the player’s software with
the f
ront panel display off, do not unplug the power
co rd until the FL OFF indicator turns off.
Note
• Ste ps 1 to 4 a re the operations performed by the user
(they a re intended to download the software from the
Inte rnet).
• Ste ps 5 to 7 a re the operations performed
(automatically) by the player (they are intended to
u pdate the software).
1 When playback is stopped, display the Home
Menu screen.
P ress HOME MENU.
2 Select and set Initial Setup.
Use
/ to select, then press ENTER.
3 Select and set Options  Software Update 
Start.
Use
/ to select, then press ENTER.
• If the player is already running the latest software, the
message “The player’s software is up to date and does
not need u pdating.” is displayed.
4 Select and set Yes.
Use
/ to select Yes, then press ENTER.
• The hel p menu is displayed if the player cannot
connect to the Inte rnet. Check the connections and
settings ( pages 17 and 41).
5 Downloading of the software start.
The softwa re download status is displayed on the screen.
• De pending on the Internet connection conditions,
softwa re downloading may take a certain period of
time.
6 Updating starts.
The f ront panel display shows messages such as
“DATA CHECK”, “WRT SYS1”, “WRT DRV” and “WRT
FLC”.
• Softwa re updating may take a certain period of time.
7 Updating completes.
The f ront panel display shows “DOWNLOAD OK” and
the player turns off automatically.
Restoring all the settings to
the factory default settings
1 Check that the player’s power is turned on.
2 When a disc is playing, press  to stop playback.
Eject the disc f rom the player.
3 While pressing , press  STANDBY/ON.
O perate using the buttons on the player’s front panel.
Note
• Afte r restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
( page 18).
• When all the settings a re restored to the factory
defaults, all the data fo r the secondary video (Picture-
in-Pictu re), secondary audio, bookmarks, etc., is
e rased.
LX52_VXJ5_IBD_EN.book 44 ページ ２００９年３月３日 火曜日 午後７時２９分