Panasonic KX-PW607DW - Manual (Page 4)

44

When the unit runs out of ink film, the following message will be displayed.
Install a new ink film.
Installations and connections
Installing the ink film
1
Open the control panel.
2
Open the back cover.
Replacement ink film:
KX-FAN190 (15 m)
￥714
KX-FAN190W (15 m X 2) ￥1,208
KX-FAN191 (15 m) (*1) ￥893
KX-FAN191W (15 m X 2) (*1) ￥1,523
4
If the ink film is slack, tighten it by
winding this gear (orange).
3
Insert the ink film.
Insert the orange
gear into the left slot
of the main unit.
Insert the white gear into the right slot
of the main unit.
5
Close the back cover pressing
“ ” down on both sides
until it clicks into place.
6
Close the control panel.
・As of February 2008. ・Tax included.
ﾌｨﾙﾑがなくなりました U23
交換してください
品番：ＫＸ－ＦＡＮ190
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.
KX-PW607DL_QG.indb 4 2008/01/24 16:08:38