Panasonic PT-LW80NTE - Manual (Page 26)

B
asi
c Op
eration
Remote control operation
E
NGLISH - 26
You can switch the input method manually by
pressing the COMPUTER, WIRELESS and
VIDEO buttons. Press the required button
several times or I H to cycle through the
input methods as follows.
You can confirm the selected input method in
displayed graphical input guide on the upper right
of the screen. Highlighted in yellow is selected terminal.
See “INPUT GUIDE” on page 37.
Q Pressing the COMPUTER button
Q Pressing the WIRELESS button
See CD-ROM contents for more detailed information
for the WIRELESS button.
Q Pressing the VIDEO button
Q Pressing the INPUT SELECT button on
the projector
Press the FREEZE button to capture the image
and stop the audio, and you can see it as a still
picture while the AV equipment are continuing. Press the FREEZE button again to escape and return to
the continuing image.
You can stop the projection and audio sound
through the projector temporarily for saving electrical power. Press the AV MUTE button again to
escape.
You can reset most of the customised settings
to the factory defaults by pressing the
DEFAULT button of the remote control. Display
the required sub menu or the menu items and press the
DEFAULT button again.
See “Main menu and Sub-menu” on page 30.
Switching the input signal
COMPUTER1 COMPUTER2
NOTE:
• Only when the COMPUTER2 SELECT is set to INPUT,
you can switch between COMPUTER1 and
COMPUTER2.
• With no signals from COMPUTER terminals, the
computer connecting guidance will be displayed. See
“Computer connection guidance” on page 51.
VIDEO S-VIDEO
COMPUTER2
COMPUTER1
S-VIDEO
WIRELESS
VIDEO
NOTE:
• Switched signal may be displayed after a short interval.
• If you select an unplugged input method, the input guidance will blink on and off several times.
• See “List of compatible signals” on page 49.
• See “Connections” on page 19.
Capturing an image
Stopping the projection temporary
Resetting to the factory default settings
NOTE:
• Some menu items are not available to reset by pressing
the DEFAULT button. Adjust each menu items
manually.
• To reset all the settings to the factory defaults, see
“INITIALIZE ALL” on page 40.