Paradyne 6382 - Manual (Page 15)

1. Introduction
6382-A2-GB20-00 April 2005 1-3
LED Description (Front Panel)
„ Power LED: On indicates that the power is supplied to the router.
„ Status LED: The Status LED serves two purposes. If the LED is continuously
lit, the DSL interface is successfully connected to a device through the LINE
port. If the LED is flickering, it is an indication that the router is training
(negotiating the connection to its partner modem).
„ Link LED: The Activity LED shows the state of the PPPoA or PPPoE
connection. Off: no PPP connection is established or the connection is not
used. Blinking: a PPP connection is being attempted. Solid green: a PPP
connection is established. Flickering: a PPP connection is established and
there is activity on the link.
„ LAN 1–4 LED: Each LAN LED serves two purposes. If the LED is continuously
lit, the Ethernet interface is successfully connected to a device through the
LAN port. If the LED is flickering, it is an indication of network activity.
Packing List
„ Your router is shipped with the following:
„ Power adapter
„ Ethernet cable (RJ45, straight-through wiring)
„ Phone cable (RJ11)
„ CD-ROM containing this manual
04-17577
1 LAN
POWER STATUS ACTIVITY
2 3 4