beautypg.com

System requirements, Ports and buttons (back panel) – Paradyne 6382 User Manual

Page 14

background image

1. Introduction

1-2

April 2005

6382-A2-GB20-00

„

Ability to act as a DHCP Server on your network

„

Compatibility with virtually all standard Internet applications

„

Address filtering and DMZ hosting

„

Downloadable flash software upgrades

„

Support for up to eight Permanent Virtual Circuits (PVCs)

„

Support for up to eight PPPoE sessions

System Requirements

In order to use your modem for Internet access, you must have the following:

„

ADSL service subscription from your ISP.

„

One computer with an Ethernet 10/100BaseT network interface card (NIC).

„

For system monitoring or configuration using the supplied web interface, a
web browser such as Internet Explorer Version 5.5 or later.

Ports and Buttons (Back Panel)

„

LINE port: This is the DSL interface which connects directly to your phone line.

„

PHONE port: This allows a phone to directly connect to the router. You do not
need to add splitter to the phone you connect here, since the router has an
internal splitter.

„

RESET Button: The RESET button is used to reset the router to the default
settings selected by your service provider. Do not use the RESET button
unless advised to by your service representative.

„

LAN 1–4 (Local Area Network) port(s): connect to Ethernet network devices,
such as a PC, hub, switch, or router. Depending on the device connected, you
may need a crossover cable or a straight-through cable.

„

POWER is where you connect the power supply.

„

ON/OFF: Controls power to the router. The router is on when this button is in
its down position, and off when the button is in its up position.