2 error states – PYLE Audio IKON RUGGED 7505-BT User Manual
Page 240
Chapter 6: Settings
Advanced Information
226
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Once the correct PIN or PUK is entered or if none was required, the modem is instructed to
perform a GSM network registration followed by a GPRS attach. The main Wireless WAN
dialog box reflects the progress of the initialization.
•
Searching for modem
•
Initializing modem
•
SIM is ready
•
Searching for network
•
Registered on network
•
Searching for packet data
•
Ready to connect
If the modem loses the connection to the GSM network, the following states are repeated:
Searching for network, Registered on network, Searching for packet data and Ready to
connect.
6.44.4.2 Error States
The following temporary error states–states that may disappear without interaction– may be
displayed:
•
Emergency calls only
The modem has found a network but is not allowed to register (e.g. no roaming agreement
between networks). The modem keeps searching for another network.
•
No network found
A network is not currently available. The modem continues searching for a network.
•
Packet data not available
The current network does not support packet data.
•
Packet data not allowed
The modem is not allowed to use packet data on the current network (e.g. no packet data
roaming agreement between network; a roaming agreement for voice may still be in place).
It is also possible that you do not have a subscription for packet data at all.
The remaining error states are permanent:
•
SIM is missing
Note: If you exceed the number of allowable attempts, a PUK entry window is brought to
the foreground. You’ll need to enter a new PIN number.