PYLE Audio IKON RUGGED 7505-BT - Manual (Page 232)

Chapter 6: Settings
Changing Network Card Settings
218 Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
6.42.4 Changing Network Card Settings
• If you use your network card in two locations such as work and home, you’ll need to
change the network to which the network card connects.
• Tap on Start>Settings>Connections tab>Network Cards icon.
• In the Configure Network Adapters dialog box, tap on the dropdown menu under My
network card connects to, choose either The Internet or Work.
6.42.5 VPN Connection Setup
A VPN connection provides a secure connection to servers through the Internet.
Before you begin, you need the following information from your network administrator:
password, domain name, TCP/IP settings and a host name or IP address of the VPN server.
•
Tap on Start>Settings. Tap on the Connections tab followed by the Connections icon.
• Under My Work Network, tap on Add a new VPN server connection.
• In the Name field, type a name for this connection.
• In Host name/IP, type the VPN server name or IP address.
• Tap on the VPN type radio button next to the type of authentication for your Ikôn:
IPSec/L2TP or PPTP. Your network administrator will let you know which option
applies to your PDA.
• Tap on Next.
• Choose the type of authentication in this screen. If you choose A pre-shared key, type
the key provided by your network administrator.
• Tap on Next.
• Type your user name, password and domain name. If a domain name was not pro-
vided to you, try the connection without entering a domain name.
If you need to edit the Advanced settings, refer to “Advanced Modem Settings” on page 214
for details about this tab.
•
Tap on Finish.
Note: Normally, you will not need to change any advanced settings. You will need to make
changes only under only the following circumstances:
The server to which you are connecting does not dynamically assign addresses, and
TCP/IP settings need to be entered.
Server DNS or WINS settings need to be changed.