Philips FW M143 - Manual (Page 18)

18
English
Tape Operation / Recording
To select and record a particular passage
within a CD track:
● Press and hold down on REW à or F.FWD
á. Release the control when you recognize the
passage you want.
● To interrupt CD playback press 2; .
● Recording starts from this exact point in the
track when you press RECORD
0.
6 To pause, press PAUSE Å. Press again to
resume.
7 To stop recording, press STOP•OPENÇç.
Recording from the radio
1 Tune to the desired radio station (see Tuning to
radio stations).
2 Press STOP•OPENÇç to open the tape
door.
3 Insert a suitable tape into the deck and close the
tape door.
4 Press RECORD
0 to start recording.
5 To pause, press PAUSE Å Press again to
resume.
6 To stop recording, press STOP•OPENÇç.
Listening to external source
1
Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX IN
terminals of your system.
2
Adjust the source selector to select TU/AUX.
3
Adjust the mode selector to select AUX.
➜
"
AUX" is displayed.
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
External sources
pg001-pg023_FWM143_37_Eng 1/28/08, 14:31 18