Philips FW M143 - Manual (Page 14)

14
English
CD/MP3 Operation
5 To pause playback press
2;. Press 2; again to
resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
6 To stop disc playback, press STOP
9.
Note: CD playback will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER, AUX.
– you select standby.
Selecting a different track
● Press TITILE-/+ ¡1 or 2™ (н/л on the
remote) once or repeatedly until the desired
track number appears in the display.
● Press 2; to start playback.
Finding a passage within a track
1 Press and hold down TITILE-/+
¡1 or 2™
(н/л on the remote).
➜ The disc is played at high speed and low
volume.
2 When you find the passage you want, release
TITILE-/+
¡1 or 2™ (н/л on the remote).
➜ Normal playback continues.
Playing an MP3 disc
1 Load an MP3 disc.
➜ The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜ "XX YYY" is displayed. XX is the current
album number and
YYY is the current track
number.
2 Press ALBUM+ (ALBUM-/+
5 /6 on the
remote) to select a desired album.
3 Press TITILE-/+
¡1 / 2™ (н/л on the
remote) to select a desired track.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
TITILE- 4 (í on the remote) or the last
track of an album by pressing TITILE+
¢
(ë on the remote).
4 Press 2; to start playback.
IMPORTANT:
The lens of the CD player should never be
touched.
Playing a disc
This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables and MP3 CD.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Adjust the source selector to select CD source.
2 Press OPEN/CLOSE on the system to open
the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.
3 Insert a disc with the printed side facing up and
press OPEN/CLOSE to close the CD door.
➜ rEAd is displayed as the CD player scans
the contents of a disc, and then the total number
of tracks and playing time (or the total number
of albums and tracks for MP3 disc) are shown.
4 Press
2; to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during disc
playback.
pg001-pg023_FWM143_37_Eng 1/28/08, 14:31 14