beautypg.com

Cd/mp3 operation – Philips FW M143 User Manual

Page 15

background image

English

15

CD/MP3 Operation

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.

1

In the STOP position, press PROGRAM
(PROG on the remote) to enter the
programming mode.

2

Use TITILE-/+

¡1 / 2™ (н/л on the

remote) to select your desired track number.
➜ The selected track number and

PROG

flash on

the display panel.

3

Press PROGRAM (PROG on the remote
control) to confirm the track number to be
stored.

4

Repeat steps 2-3 to select and store all desired
tracks.

5

To start playback of your disc programme, press
2;.

Note:
– If you wish, you can add further tracks to your
current program. Make sure you are in the STOP
position, and that you have not exceeded 20
tracks.

Erasing the programme

You can erase the programme by:

● pressing STOP 9 once in the STOP mode;

● pressing STOP 9 twice during playback;

● opening the CD compartment;

● selecting another sound source

PROG

disappears from the display.

Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 511 (depending on

filename length)

– Maximum album number: 99
– Supported sampling frequencies: 32 kHz, 44.1

kHz, 48 kHz

– Supported Bit-rates: 32~256 (kbps), variable

bitrates

Different play modes: SHUFFLE
and REPEAT

You can select and change the various play
modes before or during playback.

REPEAT ............ plays the current track

continuously

REPEAT ALL ... repeats the entire disc/

programme

SHUF ................ tracks of the entire disc are

played in random order

SHUF and REPEAT ALL repeats the entire

disc/programme continuously in
random order

1

To select your play mode, press SHUFFLE or
REPEAT on the remote control before or
during playback until the display shows the
desired function.

2

Press

2; to start playback if in the STOP

position.

3

To return to normal playback, press SHUFFLE
or REPEAT on the remote control until the
various SHUFFLE/ REPEAT modes are no longer
displayed.

● You can also press STOP 9 to cancel your play

mode.

pg001-pg023_FWM143_37_Eng

1/28/08, 14:31

15

This manual is related to the following products: