The initial setup menu 16 – Pioneer DVR-660H-S User Manual
Page 120
The Initial Setup menu
16
120
En
About NTSC on PAL TV
Depending on the Input Line System setting
and the NTSC on PAL TV setting, the signal
format output when the recorder is stopped
varies as shown in the table below.
About the input colour system
The available options of the Input Colour
System setting depend on the Input Line
System setting. The table below shows the
different options available.
Taiwan and Philippines model:
Australia, New Zealand and other Oceania
area model:
Other:.
Additional information about
component video output
If you switch the Component Video Out
setting to Progressive when using a TV that
is not compatible with progressive-scan
video, you will not be able to see anything
displayed on your TV. If this happens, press
and hold the
(Stop) button on the front
panel, then press
OPEN/CLOSE. This will
set the recorder’s video output back to
Interlace.
Input Line
System
NTSC on PAL
TV
Output
when
stopped
625 System
Off
PAL
On
PAL
525 System
Off
NTSC
On
PAL–60
Input Line
System
Built-in tuner
External
input
625 System
n/a
Auto
PAL
SECAM
525 System
3.58 NTSC
Auto
3.58 NTSC
PAL–60
Input Line
System
Built-in tuner
External
input
625 System
Auto
Auto
PAL
PAL
SECAM
SECAM
525 System
n/a
Auto
3.58 NTSC
PAL–60
Input Line
System
Built-in tuner
External
input
625 System
Auto
Auto
PAL
PAL
SECAM
SECAM
525 System
3.58 NTSC
Auto
3.58 NTSC
PAL–60
DVR660HS_TLT_EN.book 120 ページ ２００８年２月２０日 水曜日 午前１１時３３分