Pioneer DVR-660H-S - Manual (Page 111)

The Initial Setup menu
111
En
16
Component
Video Out Interlace • Select if your monitor/TV is not compatible with progressive-
scan video.
Progressive Select if your monitor/TV is progressive-scan compatible.
Check the operating instructions that came with your
monitor/TV if you’re not sure.
• If your TV is incompatible with progressive scan video and you select Progressive, you will not be able to see any
picture at all. In this case, press  OPEN/CLOSE while holding down the  (Stop) button on the front panel to
switch to Interlace (this also switches Screen Resolution on page 117 to the default setting).
• When the HDMI signal is output, no video is output from the COMPONENT VIDEO OUT .
NTSC on
PAL TV On NTSC discs will play correctly on PAL-only TVs.
Off • Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 120 for related information.
Audio In
NICAM Select
(except Taiwan and
Philippines model) NICAM • Record the NICAM audio in a NICAM broadcast.
Regular
Audio Record the non-NICAM audio in a NICAM broadcast. (You
can still switch the audio to record using the AUDIO button
before recording.)
Tuner Level
(except Taiwan and
Philippines model) Normal • Standard setting.
Compression Use if the audio level from the built-in tuner is excessive,
causing distortion.
External Audio Stereo • Select if the audio from the currently selected external input
is standard stereo.
Dual Mono/
Bilingual Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono/bilingual. This has priority over the setting you make here.
Dual Mono
Recording
(Taiwan and
Philippines model) L • Select to record the left channel of an external dual mono
source when recording to DVD in Video mode, to HDD with
HDD Recording Format set to Video Mode On, or in LPCM
mode.
R As above, but for right channel recording.
When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording
Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the
one you want on playback.
Setting Options Explanation
DVR660HS_TLT_EN.book 111 ページ ２００８年２月２０日 水曜日 午前１１時３３分