Polycom DOC2231A User Manual
Page 67
Chapter 5 - Basic Operations
5-15
3.
In the Name box, enter the participant’s name.
4.
For video participants using H.221 aggregation, enter the phone numbers
separated by semicolons.
For example, for a 2B participant: 9251921;9251922. If using Bonding
(both numbers are the same), enter the number once. Example: 9251921.
5.
In the Connection Type box, select Dial-out if the MCU/operator calls
the participant.
6.
In the Interface Type box, select the Network Protocol used to connect
the participant to the conference: ISDN, H.323 or SIP.
7.
Define the participant properties as follows:
a.
If you are defining an ISDN participant:
In the Participant Phone Numbers box, enter the participant’s
number.
SIP Participant
The Identification parameters change according to the selected Interface Type.