Connecting to an mcu, Connecting to an mcu -7 – Polycom DOC2231A User Manual
Page 39
Chapter 3 - MGC+ Software Installation and Configuration
3-7
Connecting to an MCU
Once the MCU connection parameters are defined, the MGC Manager can
connected to it. The MGC Manager reports the status of each MCU
connection.
To connect the operator workstation to an MCU:
1.
In the Browser pane, double-click the MCUs Network icon, or expand the
MCUs Network icon.
A list of MCUs appears below the MCUs Network icon.
2.
Double-click the MCU icon.
Alternatively, right click the MCU icon to which you want to connect,
and then click Connect.
The Logon dialog box opens.
3.
Enter your Login Name and Password, and then click OK.
Note that each MCU is initially configured with a default operator whose
Login and Password are both POLYCOM. Additional operators can be
defined. For more details, see the MGC Administrator’s Guide,
Chapter 6.
Installing the
MGC Manager
Initial IP
Configuration
Connecting
to an MCU
Configuring the
Network Services
Defining an MCU
Starting the MGC
Manager