Pride Mobility SC3450 - Manual (Page 30)

30 Revo
V I I I . C O M F O R T A D J U S T M E N T S
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different
heights. See figure 17.
1. Remove the seat from your Revo. See IX. “Dis-
assembly and Assembly.”
2. Use the attached ring to pull and remove the de-
tent pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
match up the adjustment holes in the upper and
lower seat post.
5. Fully insert the detent pin.
6. Replace the seat.
Figure 17. Seat Height Adjustment
ADJUSTMENT HOLES
UPPER
SEAT POST
LOWER SEAT
POST
DETENT PIN