Pride Mobility SC3450 - Manual (Page 29)

29 Revo
V I I I . C O M F O R T A D J U S T M E N T S
Figure 16. Seat Adjustments
TILLER ANGLE ADJUSTMENT
Your Revo is equipped with a pivoting tiller that allows adjustment
to several positions from the scooter deck to the farthest forward
stop.
1. Turn the tiller adjustment knob counterclockwise to loosen
the tiller. See figure 15.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to secure the tiller
in position.
NOTE: In order to lower the tiller to the scooter deck, you
must first remove the seat. See IX.“Disassembly and
Assembly.”
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Pull up on the seat lock lever to unlock the seat. See
figure 16.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in place.
ARMREST WIDTH ADJUSTMENT
The Revo armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs at the back of the seat
frame. See figure 16.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
The armrests can also be lifted upward to aid in mounting and
dismounting your Revo.
Figure 15. Tiller Adjustment
TILLER ADJUSTMENT
KNOB
ARMREST ADJUSTMENT KNOBS
SEAT LOCK LEVER
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the Revo’s seat forward or rearward to one of three settings, thereby adjusting the distance
between the seat and the tiller. See figure 16.
1. Remove the seat from your Revo. Refer to IX. “Disassembly and Assembly.”
2. Remove the four bolts that fasten the seat to the seat platform. See figure 16.
3. Align the seat platform with the desired set of holes on the seat.
4. Replace and tighten the four bolts securely.
BOLTS
ARMREST
WARNING! Remove the key from the key switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat while the scooter is in motion.