Remote control – Panasonic DMP-B200 User Manual
Page 9

G
e
tti
n
g
st
arted
VQT3C15
9
1
Turn the unit on and off (
> 12)
2
Switch the media to playback (
> 14)
3
Basic operations for playback (
> 14 – 15)
4
Use according to the instructions on the screen
5
Show Top menu/Direct Navigator (
> 14)
6
Selection/OK, Frame-by-frame
7
Show the sub menu
8
Select title numbers, etc./Enter numbers
9
Cancel the values that were entered
10 Mute the sound
Press again to clear
11 Adjust the volume (
> 14)
12 Exit the menu screen
13 Show FUNCTION MENU (
> 12)
14 Show Pop-up menu (
> 14)
15 Select audio (
> 16)
16 Return to previous screen
17 Show on-screen menu (
> 24)
18 Show status messages (
> 16)
19 Turn the unit off automatically (
> 12)
20 Change the screen settings (
> 13)
21 Change the setup of this unit (
> 26)
∫ Insert the button-type battery (supplied)
1 Pull out the holder.
2 Insert the battery and return the holder.
≥ Keep the button-type battery out of reach of children to
prevent swallowing.
∫ Range of use
The distance and angles are approximate.
Remote control
ン
ヨ
ャ
ヺ
ヷヰロ
ビ
ピ
ヒ
フ
ブ
プ
ヘ
ベ
パ
ペ
1
3
6
7
5
4
8
9
2
17
12
19
21
20
11
10
13
14
15
16
18
≥ To select: Press up, down, left, or right ([3, 4, 2, 1])
≥ To enter: Press [OK]
≥ Frame forward / Frame backward:
(While paused) press left or right ([
2;][;1])
Bottom
Pull out while pressing here
_ facing up
Lithium battery: CR2025
Remote control
signal sensor
Within 30 degrees angle
either left or right
Within 20 degrees
angle either up or
down
Remote control transmitter
Within 7 m (23 ft.) in front
DMP-B200P&PC-VQT3C15_eng.book 9 ページ 2010年12月22日 水曜日 午後6時2分