Panasonic DMP-B200 - Manual (Page 8)

VQT3C15
8
Overview
Instructions for operations are generally described using the
remote control in these operating instructions.
Front View
Rear View
1 LCD screen
2 Speaker
3 Disc lid
4 Open the disc lid
5 Turn the unit on and off ( > 12)
6 [ Í] indicator (> 10)
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
7 [CHARGE] indicator ( > 11)
While recharging the battery pack, this indicator lights up.
8 Remote control signal sensor ( > 9)
9 Change the screen settings ( > 13)
10 Adjust the volume ( > 14)
11 Show the sub menu
12 Selection/OK
13 Headphone terminal [ Ë]
( ‡ 3.5 mm stereo mini jack)
14 Switch the media to playback
It will switch every time it is pressed.
15 Playback ( > 14)
16 Stop ( > 15)
17 Skip title numbers, etc. ( > 15)
18 Return to previous screen
19 DC IN terminal (
> 10)
20 HDMI AV OUT terminal ( > 21)
21 SD card slot ( > 13)
22 Exhaust opening
23 Battery pack (supplied)
The Unit
1
2
8
3
4
5
7
6
9
1 0
1 1
1 2
1 3
14 15 16 17 18
DISC/SD RETURN
2 0
2 1
2 3
1 9
2 2
≥ To select: Press up, down, left, or right ([3, 4, 2, 1])
≥ To enter: Press [OK]
About the exhaust opening:
Do not block the exhaust opening on the side, or use in
a place that will block the exhaust opening.
The heat will build up internally, and may cause a fire or
deformation of the outer casing.
DISC SD
DMP-B200P&PC-VQT3C15_eng.book 8 ページ ２０１０年１２月２２日 水曜日 午後６時２分