Panasonic DMP-B200 - Manual (Page 37)

Re
fe
re
n
c
e
VQT3C15
37
Audio and video momentarily pause.
¾This occurs between playlist chapters or scenes ([AVCHD]).
¾When playing a title recorded on both layers, the unit
automatically switches between layers and plays the title in
the same way as a normal program. However, video and
audio may momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
¾Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. ( > 7)
¾You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. ( > 26)
¾Some BD-Video can only be output with HDMI.
Picture-in-picture is not played with BD-Video.
¾Confirm whether the disc supports picture-in-picture.
Alternative soundtrack and subtitles cannot be
selected.
¾The languages are not recorded on the media.
¾You may not be able to use the on-screen menu to change
the soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (
> 14)
No subtitles.
¾Subtitles are not recorded on the media.
¾Turn the subtitles on. Set “Subtitle” on the on-screen menu to
“On”. ( > 24)
Angle cannot be changed.
¾Angles can only be changed during scenes where different
angles are recorded.
The resume play function does not work.
¾The memorized position is cleared in the following instances:
j[∫] is pressed several times.
jThe disc or SD card is removed.
jThe unit is turned off due to such occurrences as power
outage, the removal of the AC adaptor or waste of the
battery pack’s remaining power when the unit is turned on.
¾The resume play function may not work depending on the
media.
¾[BD-V]: On BD-Video discs including BD-J, the resume play
function does not work.
You have forgotten your ratings password.
¾While the media is removed, press and hold [:] and
[SUB MENU ] on the unit at the same time for more than 5
seconds. “DVD-Video Ratings” and “BD-Video Ratings” will
return to the default settings.
The VIERA Link does not work.
¾Is the LCD screen open? (> 10)
The unit cannot be operated with the TV remote control in
any other condition.
¾When using the unit with only the battery pack, operate after
turning the unit on. ( > 12)
When a recorder or player etc. is operated with a
remote control, the unit is also simultaneously
operated.
When the unit’s remote control is operated, other
Panasonic recorders or players etc. are also
simultaneously operated.
¾Change the remote control codes on the Panasonic
recorders or players.
Other difficulties with playback
DMP-B200P&PC-VQT3C15_eng.book 37 ページ ２０１０年１２月２２日 水曜日 午後６時２分