Maintenance – Polaris Scrambler 50 User Manual
Page 127
125
Maintenance
Battery
Battery Installation and Connections
1. Set the battery in its holder.
2. Connect and tighten the red (positive) cable first.
3. Connect and tighten the black (negative) cable last.
4. Attach the hold-down strap.
5. Verify that cables are properly routed.
NOTE: When installing a new battery, make sure it’s fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery and result in a
shorter life. It can also hinder vehicle performance. If recharging is necessary, use a .5
amp battery charger.
Battery Storage
When the vehicle is placed in storage for three months or more, the battery should be
removed, stored out of the sun in a cool, dry place and tested monthly. Before reusing, take
the battery to your dealer for testing and recharging on a .5 amp battery charger.
- 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 2003 ATV Predator 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 Predator 9920872 2007 ATV Outlaw 90 2007 ATV Sportsman 90 Outlaw 9921488