Maintenance – Polaris Scrambler 50 User Manual
Page 142
140
Maintenance
Speed Control Systems
Electronic Speed Control System
Your Polaris ATV is equipped with an electronic speed control
system, which controls the engine RPM and speed of the ATV.
Speed can be adjusted by removing or installing the jumper on
the CDI (A). With the jumper installed, 50cc models will
travel no faster than 10 mph and 90cc models will travel no
faster than 15 mph. With the jumper removed, 50cc models
will travel no faster than 15 mph and 90cc models will travel
no faster than 30 mph.
Jumper Removal and Installation
1. Remove the CDI and its rubber mounting strap from the
mounting tab, which is located on the frame bulkhead near the
steering post. It can be accessed through the left front fender.
2. Remove the two screws (B) from the jumper to remove or
install the jumper. Reinstall the screws.
3. Reinstall the CDI and mounting strap onto the mounting tab.
A
B
- 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 2003 ATV Predator 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 Predator 9920872 2007 ATV Outlaw 90 2007 ATV Sportsman 90 Outlaw 9921488