Panasonic P2HD AJ-HRW10G - Manual (Page 41)

41
System setting (continued)
Setting battery level warnings (Battery)
Change battery settings.
Settings can be made for two different batteries
– Battery1 and Battery2 – which may then be selected
as required
A
B
C
D
A BATTERY1 button / BATTERY2 button
Individual settings may be made.
B Near End
If the voltage falls below this value, an error
message will be displayed and the final part of the
“Power Indication” will be shown in red.
C End
If the voltage falls below this value, the unit will be
automatically shut down.
D CLOSE button
Return to the main screen.
Setting the date and time (Date and Time)
Set the unit's date and time.
A
D
F
C
E
B
G
A yyyy-mm-dd
Set the date (year/month/day).
B hh:mm
Set the time.
C + button
Use this to increment the numerical values.
D – button
Use this to decrement the numerical values.
E CANCEL button
Use this to undo the change made to a numerical
value.
F APPLY button
Use this to set the date and time which have been
input.
G CLOSE button
Return to the main screen.
Follow the steps below to change the date.
1
Select the column where the change is to be
made.
2
Press the + button or - button to change the
numerical value.
3
To enter the change, press the APPLY button.
To cancel the setting, press the CANCEL button.