Panasonic P2HD AJ-HRW10G - Manual (Page 22)

22
Copying
The data on the recorded P2 cards is copied onto the HDD.
The data is copied from the P2 card onto the HDD on a card by card basis or clip by clip basis (see page 27).
Use the copying method that best suits the application concerned.
Copying entire cards
Two copy modes are available when copying entire
cards, as follows.
• Manual copy mode: Data is copied after inserted P2
cards are selected.
• Auto copy mode: Data is automatically copied from
inserted P2 cards.
To switch between auto and manual copy modes and
complete the settings, access the [Copy Settings] tab
on the "SETTING" screen (page 39).
Manual copy mode
Insert the P2 card to copy and press the COPY button
on the main screen. Next, complete the copy settings
as follows.
A B
C D
(In the RAID1 mode)
A B
C D
(In the JBOD mode)
A SOURCE
Select the P2 card to copy.
(Multiple cards in slots 1–5 can be selected.)
B DESTINATION
Select the destination for copying.
In RAID1 mode, there is only one destination
available, and there is no need to select it.
C START button
Start manual copying.
D CLOSE button
Return to the main screen.