Philips Wireless Equipment Box - Manual (Page 21)

21
Getting the iPronto Up and Running
Wireless Network Settings
After setting the general settings, you need to set the wireless network settings. This is needed so your iPronto can
connect to your home network and to the Internet, and to communicate with iProntoEdit. The Wireless Access Point
(WAP) sends out RF (radio frequency) signals to the iPronto’s Wireless LAN Adapter. The iPronto must use the same
wireless settings as the WAP.
How to set up your WAP on the iPronto, depends on the configuration you have in your home:
■ Your iPronto is connected to a network with a PC: You can read and modify information about your WAP settings
on your PC.
■ Your iPronto is connected to a network without a PC: You can read information about the WAP settings in your
WAP manual.
Wireless tab of the System Settings
iPronto.qxd 01-08-2002 08:44 Pagina 21