Philips FW D5 - Manual (Page 26)

3139 115 20032
26
English
Playing a DVD
Playing a title
1 After inserting the disc and closing the
tray, playback starts automatically
™ The status window and the display
show the type of disc loaded, as well
as information about the disc’s
contents and playing time.
• The disc may invite you to select an
item from a menu. If the selections are
numbered, press the appropriate
numerical key; if not, use the
1 or 2 /
3 or 4 keys to highlight your selection,
then press OK.
™ The currently playing title and
chapter number are shown in the
menu bar and display.
™ The elapsed playing time is shown in
the status window and the display.
• If required, you can use the
SURROUND CONTROL (or SURR on
the remote control) key to select
Multichannel, Stereo, Surround or 3D-
Surround. Play may stop at the end of
the Title, and the player may return to
the DVD menu. To go on to the next title,
press
2.
2 To stop play at any other time, press
Ç.
™ The default screen will appear, giving
information about the current status
of the player.
• You can RESUME play from the point at
which you stopped play. Press 2 (PLAY);
when you see the RESUME icon . on
the screen, press 2 (PLAY) again.
™ The RESUME feature applies not only
to the disc in the player, but also to
the last four discs you have played.
Simply reload the disc, press
2 (PLAY); when you see the RESUME
icon
. on the screen , press
2 (PLAY) again.
Note:
– Since it is usual for DVD movies to be
released at different times in
different regions of the world, all
players have region codes. Discs can
have an optional region code. If you load
a disc of a different region code into
your player, you will see the region code
notice on the screen. The disc will not
play and should be removed from the
player.
Playing a VCD
Playing a disc
1 After inserting the disc and closing the
tray, playback starts
automatically.
™ The status window and the display
show the type of disc loaded, as well
as information about the disc’s
contents and playing time.
• The disc may invite you to select an
item from a menu. If the selections are
numbered.
™ The currently playing track number is
shown in the menu bar and the
display. The elapsed playing time is
shown in the status window and the
display.
• If required, you can use the
SURROUND CONTROL (or SURR on
the remote control) key to select
Multichannel, Stereo, Surround or 3D-
Surround.
2 To stop play at any time, press Ç.
™ The default screen will then appear.
• You can RESUME play from the point at
which you stopped play. Press 2 (PLAY);
when you see the RESUME icon . on
the screen, press 2 (PLAY) again.
™ The RESUME feature applies not only
to the disc in the player, but also to
the last four discs you have played.
Simply reload the disc, press
2 (PLAY); when you see the RESUME
icon
. on the screen , press
2 (PLAY) again.
Note:
– When PBC mode is switched on,
RESUME play is not available.
General features
Note:
– Unless stated otherwise, all operations
described are based on remote control
operation. A number of operations can
also be carried out via the menu bar on
the screen.
Moving to another title/track
When a disc has more than one title or
track (which you can see from both the
menu bar and the display), you can move to
another title/track as follows:
1 Select W (TITLE/TRACK) in the menu
bar.
2 Press ë briefly during play to select
the next title/track.
• Press í briefly during play to return to
the beginning of the current title/track.
Press í briefly again to step back to
the previous title/track.
3 To exit, press 1 or 2.
DVD-VIDEO
1pg 01-42/D5/22-Eng new 9/14/00, 8:36 AM 26