Philips FW D5 - Manual (Page 15)

3139 115 20032
15
English
Switching the system ON
• Press DVD, CD, TUNER or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on the
remote control.
™ The system will switch to standby
mode.
Switching the system to power
save mode
(when Demonstration mode
is disabled)
• Press POWER SAVE to switch to
energy saving mode ( < 2 watts ).
™ "LOW POWER STANDBY ON" will
be displayed, after which the display
screen goes blank.
™ The low power STANDBY ON LED
will be lit.
Note:
– if the demonstration mode has not been
disabled, it will resume 5 seconds later.
OPERATING THE SYSTEM
Selecting the Source
• Press the desired source selection
button: DVD, CD, TUNER or AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX/
CDR IN terminals.
Dim mode
You can select the desired brightness for
the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The
DIM appears on the display.
™ "DIM 1", "DIM 2", "DIM 3" or
" DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
P3 P6 P1 P2 P5 P4
FTS TITLE CHAP. SLEEP SLEEP DIM TIMER LW FM A M W
DIM 1 - normal brightness with
Spectrum Analyzer Off
P3 P6 P1 P2 P5 P4
FTS TITLE CHAP. SLEEP SLEEP DIM TIMER LW FM A M W
DIM 2 - half brightness with Spectrum
Analyzer On
P3 P6 P1 P2 P5 P4
FTS TITLE CHAP. SLEEP SLEEP DIM TIMER LW FM A M W
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the
system will be switched off.
P3 P6 P1 P2 P5 P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMER LW FM A M W
Volume Control
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
1 Press MUTE on the remote control to
switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME level to
switch on the sound.
1pg 01-42/D5/22-Eng new 9/14/00, 8:36 AM 15