Dvd-video, Positioning the speakers, Switching surround control sound – Philips FW D5 User Manual
Page 19: English
3139 115 20032
19
English
DVD-VIDEO
Positioning the Speakers
To get the best surround sound effect,
place the speakers as follows.
TV
CENTER
SPEAKER
SURROUND
RIGHT
SURROUND
LEFT
FRONT
LEFT
FRONT
RIGHT
MINI HIFI
SYSTEM
SUB-
WOOFER
Front Left and Right Speakers
For the best sound, place the Left and Right
speakers at an angle of approximately 45
degrees to the listener. If the speakers'
magnetic field affects the television
picture, increase the distance between the
TV and the speakers.
Centre Speaker
For the best sound, place the centre
speaker at the same height as the left and
right speakers. Place the centre speaker
directly above or beneath the television.
Rear (surround) Speakers
The surround speakers should be placed at
normal listening ear level or mounted on
the wall at the back of the room. Most
important, experiment when placing the
surround speakers in order to obtain the
best sound.
LEFT
CENTER
RIGHT
SURR
SURR
CHANNEL
LEFT
CENTER
RIGHT
SURR
SURR
CHANNEL
Switching Surround Control
Sound
You can switch through the different
surround modes. Note that the
possibilities are related to speaker setup as
defined.
• Press SURROUND CONTROL
(or
SURR on the remote control) to select :
MULTICHANNEL, STEREO, SURROUND
or 3D SURROUND mode.
™ The message "DOLBY DIGITAL
AC3 5.1 CHANNEL, STEREO,
SURROUND or 3D SURROUND"
will be displayed.
Multichannel (5.1)
In addition to SURROUND,
the surround mode used
will be displayed. AC3
must be available on the
source material.
Stereo
All sound is reproduced and
played through the front left
and right speakers. This
enables standard stereo
reproduction.
Surround
This surround mode enables
normal surround sound
reproduction with two
speakers. Depending on
the source material, Dolby Pro Logic or
MPEG is reproduced (for connection to
another Dolby Pro Logic decoder).
3D Surround
The sound of the rear
channel is simulated by the
front left and right
speakers.
Note:
– Always refer to OSD when selecting
surround control sound. When in stop
mode, the player will not display the
correct surround selection.
LEFT
CENTER
RIGHT
SURR
SURR
CHANNEL
LEFT
CENTER
RIGHT
SURR
SURR
CHANNEL
1pg 01-42/D5/22-Eng new
9/14/00, 8:36 AM
19