Pentax M40 - Manual (Page 64)

62
4
Tak
ing Pi
cture
s
R
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Program).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture
status.
4
Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.79 - p.95) for details of how to set the
functions.
5
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Letting the Camera Choose the Optimal Settings
(Program Mode)
1, 2
3
5, 6
0 8 / 0 1 / 2 0 0 7 0 8 / 0 1 / 2 0 0 7
3 8 3 8 3 8
1 4 : 2 5 1 4 : 2 5