Pentax M40 - Manual (Page 176)

174
9
App
e
nd
ix
Troubleshooting
Problem Cause Remedy
Camera will not
turn on
Battery is not installed
Check if the battery is installed. If not,
install the battery.
Battery is installed
incorrectly
Check orientation of the battery.
Reinsert the battery according to the +-
symbols on the battery compartment.
(p.21)
Battery power is low Charge the battery.
No image on LCD
monitor
Camera is connected
to a PC LCD monitor is off when camera is
connected to a computer.
Camera is connected
to the AV equipment LCD monitor is off when camera is
connected to the AV equipment.
Image is displayed but
is hard to see
Image on LCD monitor may be hard to
see when taking pictures outside in
sunlight.
Shutter will not
release
Flash is charging
Pictures cannot be taken while the flash is
charging. Wait until charging is finished.
No available space on
SD Memory Card or in
the built-in memory Insert SD Memory Card with available
space or delete unwanted images. (p.26,
p.118)
Recording Wait until recording is finished.
Picture is dark
Subject is too far away
in a dark environment,
such as a night scene
Picture becomes dark if subject is too far
away. Take picture within range of flash.