Operating this unit, Setting the menu language, Switching the assist subtitle on or off – Pioneer Super Tuner III D AVH-P4950DVD User Manual
Page 39: Setting the angle icon display, Setting the aspect ratio

1
Touch SETUP and LANGUAGE and then
touch AUDIO LANG.
Audio language menu is displayed and the
currently selected language is highlighted.
# To switch to the second language select
menu, touch
NEXT.
# To return to the first language select menu,
touch
PREV.
2
Touch the desired language.
The audio language is set.
# If you have selected OTHERS, refer to When
you select
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
outputted.
! You can also switch the audio language by
touching
AUDIO during playback. (Refer to
Changing audio language during playback
(Multi-audio) on page 26.)
! Even if you use AUDIO during playback to
switch the audio language, this does not af-
fect the settings here.
Setting the menu language
You can set the preferred language for dis-
plays of menus recorded on a disc.
1
Touch SETUP and LANGUAGE and then
touch MENU LANG.
A menu language menu is displayed and the
currently set language is highlighted.
# To switch to the second language select
menu, touch
NEXT.
# To return to the first language select menu,
touch
PREV.
2
Touch the desired language.
The menu language is set.
# If you have selected OTHERS, refer to When
you select
Note
If the selected language is not recorded on the
disc, the language specified on the disc is dis-
played.
Switching the assist subtitle on
or off
If assist subtitles are recorded on a DVD disc,
you can display them by turning the assist
subtitle function on.
You can turn assist subtitles on or off as de-
sired.
1
Touch SETUP and LANGUAGE and then
touch NEXT.
2
Touch A SUB TITL to turn assist subtitles
on.
# To turn the assist subtitle off, touch
A SUB TITL again.
Setting the angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
1
Touch SETUP and VISUAL to display the
DVD visual set up menu.
2
Touch M. ANGLE to turn angle icon dis-
play on.
# To turn the angle icon display off, touch
M. ANGLE again.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to
VIDEO OUTPUT.
Operating this unit
En
39
Section
03
Operating
this
unit