Pioneer Super Tuner III D AVH-P4950DVD - Manual (Page 33)

Audio Adjustments
Introduction of audio adjustments
1
1 Audio display
Shows the audio adjustment status.
Important
If the multi-channel processor (DEQ-P7650) is
connected to this unit, the audio function will be
changed to the multi-channel processor
’s audio
menu. For details, refer to Introduction of DSP ad-
justments on page 58.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch AUDIO to display the audio func-
tion names.
The audio function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch
NEXT.
# To return to the previous group of function
names, touch
PREV.
# If EQ-EX function has been selected and only
when EQ-EX is turned on and
CUSTOM is se-
lected as the equalizer curve, you can switch to
BASS and TREBLE.
# Only when the subwoofer controller setting is
FULL, NON FADING will be displayed instead of
SUB WOOFER. (Refer to Setting the rear output
and subwoofer controller on page 43.)
# When selecting the FM as the source, you
cannot switch to
SLA.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Touch FAD/BAL on the audio function
menu.
# When the rear output setting is SUB. W, BAL
will be displayed instead of
FAD/BAL. Refer to
Setting the rear output and subwoofer controller
on page 43.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:15 to REAR:15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FR:00 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB. W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 43.
3 Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
LEFT:09 to RIGHT:09 is displayed as the left/
right speaker balance moves from left to right.
Operating this unit
En
33
Section
03
Operating
this
unit